HondaShowOff.com Forums

HondaShowOff.com Forums (http://www.hondashowoff.com/forums/index.php)
-   Audio/Electronics & Non-Performance Mods (http://www.hondashowoff.com/forums/forumdisplay.php?f=49)
-   -   under dash harness (http://www.hondashowoff.com/forums/showthread.php?t=14149)

92eg9 09-21-2010 04:26 PM

under dash harness
 
well, i have a b18b1 engine with an obd1 ecu, the thing is the harness is all cut up and taped where the ecu connects (bought it like that), i know i need the harness that goes from the engine bay trough the firewall to the ecu. i went to the junk yard today and found a 1994 honda civic ex, i tried to remove the harness but there are some differences between the harness that i have and the one from the other car. my question is: would it be easier to just get the one from an lx or will the one for the ex work without cutting anything??

Pata078 09-21-2010 08:49 PM

what car is this whole thing going in?

if you like, send me your engine harness and I'll fix it all up for you.
PM me if you're interested.

did you get the D16z6 engine harness off that 94 Ex? They're different.

also curious, what ecu do you have for the Ls B18b1 motor?

92eg9 09-23-2010 03:40 PM

the harness is going into a 1992 civic lx 4dr. about the harness i got, i dont know what engine came with the car but the car is a 1994 ex 2dr. the ecu that i have in the car is an obd1, dont know whats the ecu code since there is no sticker!!

Pata078 09-23-2010 10:59 PM

there's one spot where you'll be able to see the number of the ecu. Use a screw driver and unscrew to open it.

post pictures of what you got.

lets see whats going on...

Ravikaleova 12-15-2014 12:48 AM

Quote:

Originally Posted by 92eg9 (Post 115445)
well, i have a b18b1 engine with an obd1 ecu, the thing is the harness is all cut up and taped where the ecu connects (bought it like that), i know i need the harness that goes from the engine bay trough the firewall to the ecu. i went to the junk yard today and found a 1994 honda civic ex, i tried to remove the harness but there are some differences between the harness that i have and the one from the other car. my question is: would it be easier to just get the one from an lx or will the one for the ex work without cutting anything??
e cam[/URL]

I changed from the Notion Ink Adam for the most part on the grounds that I was to a great degree disillusioned in the nature of the presentation on the Adam. There aren't words to depict how much better the presentation alone is on the Tab.


All times are GMT -6. The time now is 05:35 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2003 - 2008, HondaShowOff.com