![]() |
#1 |
Noob
|
![]()
im in the midst of trying to install my VTEC oil pressure switch (easy enough...) and ive run into a problem. where the switch should be screwed in is a hole w/ no threads. its about a 1/4 inch deep not threaded and nothing in it, so i cant screw in the switch. the vtec solenoid and connector is there as well. im confused and i called an acura dealership and they are confused. so im trying here. the net didnt turn much up either.
Note: did some further researching and ive come to the conclusion that JDM motors do not use the VTEC oil pressure switch...which i find odd. has anyone heard of this? Last edited by slimtdx; 04-05-2007 at 05:18 PM. |
![]() |
![]() |
![]() |
#2 |
Regular User
|
![]()
nah, didn't know that. Then again i don't have vtec :-P
__________________
"Redline first gear, and then pop the clutch three times. Let your toe lift, then slam it into reverse.VTEC every time...." 1995 Honda Civic DX - sold ![]() 2002 Subaru Impreza WRX - teh daily |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|